知Yizhi Daily
← Back to this edition

Conversations

Flipper One opens preorders, emphasizing open-source Linux, dual processors, and a network multitool

Edition 2026-11-04 · 08:00 Beijing time

Flipper Devices announced preparations for the Flipper One Kickstarter and opened preorders. The device uses a dual-processor architecture with the RK3576 and RP2350, runs open-source Linux firmware, and features Wi-Fi 6E, Gigabit Ethernet, and M.2 expansion. Positioned as a network multitool, it supports functions such as network scanning and power measurement.

Flipper One is positioned as an open Linux computer and network multitool. Its main processor is a Rockchip RK3576 octa-core ARM SoC, responsible for running Linux, user applications, network interfaces such as Wi-Fi and Ethernet, and high-speed peripherals including USB3 and PCIe; the chip also integrates an NPU for AI acceleration and a GPU supporting HDMI and DisplayPort output.

The device also includes a low-power MCU, the Raspberry Pi RP2350, which controls the LCD, physical buttons, status lights, and power subsystem, and manages boot parameters when the Linux subsystem is shut down or the kernel is not yet ready. The dual-processor architecture lets users control the device directly through the built-in screen without completely losing access when Linux has not booted.

The project emphasizes fully open-source Linux firmware and mainline-kernel support, aiming to reduce vendor-specific BSP restrictions and binary-firmware blocks. The team has collaborated with Collabora to advance the RK3576 SoC into the mainline kernel. The device can also obtain SSH access and charging simultaneously through a single USB cable and emulate a virtual network card, serial port, and mass-storage device, with no drivers required on mainstream desktop and mobile systems.

For networking, Flipper One supports up to five uplinks and can configure dynamic routing, failover, load balancing, and firewall rules. It can also act simultaneously as a Wi-Fi hotspot and client, and tunnel traffic through VPNs and multiple gateways. Its network-scanning function can map topology, discover hosts, and scan open ports and services, while also serving as a passive sensor to detect attacks and anomalies.

Hardware expansion uses Key-B M.2, allowing installation of a 5G cellular modem, SDR radio, satellite modem, AI accelerator, NVMe or SATA SSD, and Wi-Fi cards through adapters. A built-in power meter can display real-time power consumption of the entire device, including the CPU and peripherals.

Original sources

Hacker News ↗
Back to this editionOpen interactive reader