Conversations
MyQ Garage Bridge Offline Reboot Problem Reverse-Engineered Down to AES Key Extraction
A researcher documented an issue in which the Chamberlain/LiftMaster 819LMB MyQ Home Bridge repeatedly reboots in an internet-free environment. After the device cannot connect to cloud MQTT, it triggers a watchdog. A complete local emulation requires exporting the TLS-PSK AES-128 key through a PCB debugging interface.
The device is also known as the MYQ-G0303 MyQ Home Bridge. After the author isolated it on an IoT VLAN without WAN access, the device kept trying to connect to port 8883 on connect.myqdevice.com and connect1.myqdevice.com. If the domains cannot be resolved or are pointed to nonexistent addresses, the connection hangs and times out, and an internal watchdog eventually reboots the device or Wi-Fi module, making it unavailable in HomeKit every 5 to 10 minutes.
The author tried resolving the domains to a local service and immediately returning TCP RST. Although that blocked the 5-to-10-minute crash loop, the device would still reboot on a 30-minute timer if it did not successfully connect to the MyQ cloud MQTT service and receive retained messages after subscribing to topics, causing brief interruptions to the HomeKit integration. Based on this, the author proposed a locally impersonated MQTT server, with the prerequisite of obtaining the device's TLS-PSK AES-128 key.
The extraction method uses debug pads on the PCB reserved for the Cortex-M4 CPU. The author listed tools including an Arduino Uno, Arduino IDE, two resistors between 220Ω and 1000Ω, jumper wires, and tape. The resistors connect SWDIO and SWCLK to Arduino D8 and D9, with a common ground. After running a script in the serial monitor at 115200 baud, it is possible to pause the CPU, scan for NVM functions in flash memory, and output the serial number and AES-128 key. The article is a personal hardware-research record and does not state whether the vendor responded or how applicable the method is to ordinary users.